Following are the steps changing the Wireless Channel:

*Note: For best results, if possible connect the device directly to the router via Ethernet cable.

Click HERE to download the PDF version.

Step 1: Access the modem

Open a browser, and navigate to

A prompt for username and password will appear.
By default, username is 'admin' and password is 'admin'

Step 2: Access Wireless Settings

  • Once logged in, Choose 'Wireless' on the left menu
  • Choose 'Advanced' from the sub-menu.
  • To view/change the current Wireless Channel

    By default, it is set to 'Auto', beside the selection box indicates the current wireless channel used.
    To change the channel, use the drop down and choose the appropriate channel desired.

    It requires some trial and error to find a clear channel depending on the area/surroundings.
    Typically try to choose a channel frequency opposite from its troubled channel frequency.
    For example; if currently set to channel 11, try changing it to channel 1.

    Step 3: Save Settings

    Hit 'Save/Apply' and the modem will now broadcast on the new channel.

    Most devices will re-connect on a new channel automatically.
    If it does not re-join the network, select the WiFi connection on the device again to resume.

    Note: If using Ethernet, disconnect it and allow the device to re-connect to the wireless.
    If the wireless issues persist, repeat the steps above to attempt to find a clear channel.
    If you are unable to resolve the issue on any channel, contact support for advanced troubleshooting.